Inspiration Wednesday with Heartfelt Creations...Swirling Clematis

Good morning my friends and welcome to another Inspiration Wednesday with Heartfelt Creations!   As we continue along with the Climbing Clematis Collection, I'm sharing another shaped card I have made.

 

Products Used:
Climbing Clematis Paper Collection, HCDP1-2128
Clematis Cling Stamp Set, HCPC-3954
Clematis Die, HCD1-7355
3D Clematis Shaping Mold, HCFB1-5006
Leafy Accents Cling Stamp Set, HCPC-3835
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Elegant Swirl Gateway Die, HCD2-7327
Arrows and Banner Die, HCD1-7204
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Heart of Gold Prills, ANC804
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436

Ranger Archival Ink Pad - Majestic Violet, RACP494

Other Products: Die Cut Machine, Hot Glue Gun, Dimensional Tape, Flat Back Pearls

Instructions: This shaped card measures 5" x 7". Make card base using the Eyelet Swirl Gateway die. Cover the front with a piece of sheet 9B of the paper collection. Use the Eyelet Swirl Gateway die to cut a decorative piece using white card stock and cut a piece of purple Sheet 10B and glue to the center back of the decorative die. Cut a piece of sheet 9B to layer on top of the white decorative piece. This will be where we put the flat back pearls. Glue this decorative piece to the card front.

Cut a Piece of sheet 5A and glue to the inside of the card, then cut a piece of sheet 5B for the back of the card and glue it down.

Stamp the flowers onto the Flower Shaping Paper using Majestic Violet and color with a Stack and Store Dauber. Use coordinating die to cut out the flowers. Stamp the Leafy Accent leaves using Fern Green Ink and color with Leaf Green Ink, then cut out with coordinating dies. Place the flowers and leaves into their coordinating 3D shaping molds and spritz with water then run through die cut machine. Turn out onto desk to dry. Once dry, add prills to the flower centers, decide on placement and use hot glue to glue down.

Stamp the sentiment onto white card stock using Majestic Violet Ink and cut out with the arrow die. Edge the white cardstock with Majestic Violet and adhere to card front using dimensional tape.

Using Dries Clear Adhesive glue down the flat back pearls onto the green accent piece on the card front allow to dry.

To finish the card, add Crystal Clear glitter to the flowers and allow to dry.

If you would like more inspiration you can head over to the Heartfelt Creations blog and see what the other designers have made!

INTRODUCING THE AMAZING PAPER GRACE BEAUTIFUL SENTIMENT VIGNETTES..

The Beautiful Sentiment Vignettes Collection is made up of 7 different die sets and 

a stamp set.  I used the stamp set here:

 STP-058 Beautiful Inside and Out Sentiments 

I used S5-436 Grand Cinch and Go Flowers  by Becca Feeken to make the pretty blooms gracing the front of my card.  I also used Embossing Folder SES-007 for the beautiful background!

My card base is 4 1/4" X 5 1/2" and it has a layering piece of Floral Butterfly Paper from Heartfelt Creations and then the next layer is using the SES-007 Embossing folder.  It gives a very clear image and is just the perfect place to put the sentiment which is stamped using Memento Tuxedo Black Ink onto another piece of the Floral Butterfly Paper.  

The blooms are cut from a light weight watercolor paper and colored with Archival Cactus Flower ink.  The leaves were colored with Archival Leaf Green and Cactus Flower inks.  

Inspiration Wednesday with Heartfelt Creations...Butterfly Fridge Magnet...

Good morning friends and welcome to Inspiration Wednesday with Heartfelt Creations.  I'm here this morning to share a Fridge Magnet I made using the Climbing Clematis  and the Floral Butterfly collections.

 Products Used:

Climbing Clematis Paper Collection, HCDP1-2128
Clematis Die, HCD1-7355
Clematis Cling Stamp Set, HCPC-3954
Clematis Birdhouse & Trellis Cling Stamp Set, HCPC-3956
Clematis Birdhouse & Trellis Die, HCD1-7357
Small Floral Butterfly Cling Stamp Set, HCPC-3953
Small Floral Butterfly Die, HCD1-7354
Rounded Window Frame Die, HCD1-7271
Eyelet Circle & Basics Small Die, HCD1-7154
Art Foam Paper-10 Pack, HCFS1-465
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Heart of Gold Prills, ANC804
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Majestic Violet, RACP494

Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Tiger Lily, RACP670
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Toffee Crunch, TSMP805

Other Products: White Cardstock, Die Cut Machine, Scor-Tape, Purple Ribbon, White Embossing Powder, Heat Gun, Magnet, ColorBox Frost White Pigment Ink

Instructions: Using white cardstock, die cut the center of the Rounded Window Frame Die. Using the circle die, cut out a piece of the paper collection. I chose sheet 9A which is blue. Glue to the Window Frame Die and set aside.

Stamp the Clematis Trellis using Rich Cocoa Ink. Color in the flowers using Majestic Violet ink and a dauber. Cut out the Trellis using the coordinating die. Then use a circle die from the Eyelet Circle & Basics dies and cut the trellis. Adhere to the center of the piece. Glue the magnet to the back of the decorative circle and cut another circle out of white cardstock and glue to the back to cover the magnet. This will also keep it from scratching your refrigerator.

Stamp the flowers using Art Foam Paper and Lulu Lavender ink. Using a dauber and Majestic Violet ink color the center of each petal. Cut out with coordinating dies and then shape using a heat gun. Add Prills to the center of the petals and allow to dry. Stamp the leaves with Fern Green ink and color with Leaf Green ink. Use coordinating die to cut out the leaves and shape with heat gun. Set aside.

Stamp the butterfly onto vellum using white pigment ink and then emboss with white embossing powder. Use coordinating die and cut out the butterfly. Color the butterfly with Majestic Violet and Sunflower ink then I added just a tiny bit of Tiger Lily. You can color on either side of the butterfly but I chose to color on the back which gave it a more subtle look.

Tie a bow in the ribbon and use Scor-Tape and glue to adhere to the bottom of the refrigerator magnet. Decide on placement of flowers and leaves and glue down. To finish, decide on placement for the butterfly and glue it down.

These magnets are a quick and easy project and can be given as a little gift to a friend or loved one. I also have several gracing the front of my refrigerator as well. Enjoy!

I hope you enjoy this...I really enjoyed making it!  For more inspiration you can head over to the Heartfelt Creations Blog and see what the other design team members have made.

Forever in our Memory....

Good morning freiends,  I'm here this morning to share a card made using a new release from Spellbinders S5-457 Forever in our Memory Vignette by Becca Feeken.  I have been a long time lover of all things Becca Feeken and Spellbinders so it is an honor to make and share this card. 

My finished card size is 6" X 6".  Make card base and cover with a piece of designer paper.  

Using white cardstock cut out the pieces of the die and then cut out a shadow piece using a coordinating piece of the paper collection.  

I used S5-436 Grand Cinch and Go Flowers by Becca Feeken to make these sweet little roses to grace the edge of the card.  These dies are so very easy to cut and make flowers. I just cut them out of light weight watercolor paper and colored using various shades of inks.  The centers are Lettuce Entertain You Prills.

The gold butterfly is from S4-987 Flutter Wing Shadowbox Butterflies also by Becca Feeken.  

I hope you enjoy this card as much as I have enjoyed making it.  It makes a lovely, tasteful rememberance card,  If you would like to see more of the new release just follow this link over to the Spellbinders site and have a look around.  I know you are going to find something you just can't live without:    Beautiful Sentiments Vignette

Supplies Used:

S5-457 Forever in our Memories Vignette 

S5-436 Grand Cinch and Go Flowers

S4-987 Flutter Wing Shadowbox Butterflies

Heartfelt Creations Wild Rose Paper Collection

Gold Cardstock

Watercolor Paper

Archival Magenta Hue Ink

Archival New Sprout Ink

Lettuce Entertain You Prills

Die Cut Machine

Art Glitter Dries Clear Glue

Inspiration Wednesday with Heartfelt Creations...

Good morning friends!  I'm here this morning to share another card I have made using the Climbing Clematis Collection.  This is going to be one I reach for time and time again!

  

Products Used:
Climbing Clematis Paper Collection, HCDP1-2128
Clematis Spray Cling Stamp Set, HCPC-3955
Clematis Spray Die, HCD1-7356
Clematis Cling Stamp Set, HCPC-3954
Clematis Die, HCD1-7355
Courtyard Elegance Die, HCD1-7283
3D Clematis Shaping Mold, HCFB1-5006
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Dove Blender Kit, 241159
Heart of Gold Prills, ANC804
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Leaf Green, RACP436

Other Products: White and Purple Cardstock, Die Cut Machine, Dimensional Tape, Hot Glue Gun

Instructions: My finished card size is 5 1/2" x 5 1/2". Make card base and cover with a piece of the paper collection. I chose sheet 1B. Cut a piece of purple cardstock 1/4" smaller than card base and adhere to card front. Cut a piece of white card stock 1/4" smaller and using dimensional tape, adhere to card base. I cut a piece of the paper collection 1/4" smaller measuring 4 3/4" x 4 3/4" and adhere to card base. I chose a piece of sheet 12B for this final layer.

I cut the center of the Courtyard Elegance Die and using dimensional tape in the center, adhere to card front. Using Majestic Violet ink stamp the sentiment onto a piece of the purple cardstock and cut out using the very center die of the Courtside Elegance Die then glue to the center of the die cut.

Stamp the Clematis Spray twice onto Flower Shaping Paper using Rich Cocoa ink and color using the Dove Blending Tool. Cut out with coordinating dies. Glue to the Circle diecut on the card front.

Using a sheet of the Deluxe Flower Shaping Paper and stamp the flower petals using Majestic Violet ink. I colored using stack and store daubers. Cut out using coordinating dies and lay onto the mold, spritz with water and run through the die cut machine. Lay them out onto a surface to dry. Add Prills to the centers and allow to dry. Use the glue gun to adhere to the two sprays on the card front. The card is finished.

Introducing the Climbing Clematis from Heartfelt Creations...

Good morning friends.  I'm here this morning to share with you a card I made using the brand new Climbing Clematis Collection from Heartfelt Creations! 

 

Products Used:
Climbing Clematis Paper Collection, HCDP1-2128
Clematis Cling Stamp Set, HCPC-3954
Clematis Die, HCD1-7355
Clematis Birdhouse & Trellis Cling Stamp Set, HCPC-3956
Clematis Birdhouse & Trellis Die, HCD1-7357
Regal Lattice Gateway Die, HCD2-7339
Eyelet Oval & Basics Small Die, HCD1-7156
Royal Elegance Frames Die, HCD2-7307
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Art Foam Paper-10 Pack, HCFS1-465
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Hydra Sponges, RLHS100
Scor-Pal Measuring & Scoring Board, 173842
Dove Blender Kit, 241159
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Rajni Chawla's Crystal Clear, PGM15015

Heart of Gold Prills, ANC804
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Majestic Violet, RACP494
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Ranger Archival Ink Pad - Magenta Hue, RACP614
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Danube Blue, TSMP600
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Rich Cocoa, TSMP800

Other Products: Die Cut Machine, Heat Gun, Misti Stamping Tool, Dimensional Tape, White and Black Cardstock

Instructions: My finished card size is 4" x 6". Make card base and cover with a piece of Sheet 3B of the paper collection. Next, I found one of the card fronts on the paper collection Sheet 3A. Mat that onto a piece of black cardstock to give it a more dimensional look and then using dimensional tape, adhere to the card front.

Using white cardstock die cut the center part of the Regal Lattice Gateway Die and the Royal Elegance Frames. Use the Eyelet & Ovals Basic die that fits best into the center of the Royal Elegance Frames and die cut an oval out of the lattice piece. Glue this lattice oval to the back of the Royal Elegance Frame and allow to dry. Using a sponge and Dries Clear Adhesive, add glitter to this piece and then glue it down onto the card front.

Stamp the flowers with Lulu Lavender ink on Art Foam and I allowed them to dry overnight. Using the stack and store daubers, color the centers of the flowers with Majestic Violet ink and then use coordinating dies to cut them out. Use the heat gun to shape the flowers. Add prills to the centers of the flowers and allow to dry.

Stamp the birdhouse with Rich Cocoa and the little birds with Tuxedo Black onto white cardstock and cut out with coordinating dies. Color with the Dove Blender Pen and various colors of ink to suit your taste. I used the flower shaping tools to add a bit of dimension to the birdhouse. Glue the birdhouse to the right side of the card front and add the flowers and the little birds and allow to dry.

Stamp the sentiment onto white cardstock. I covered part of the stamp with tape then inked it and pulled off the tape and stamped the one word. This allowed me to use one word of the sentiment. Mat this piece onto a piece of the Sheet 12B of the paper collection and then use a bit of dimensional tape to adhere to the card front. The card is finished!

Inspiration Wednesday with Heartfelt Creations...Sky Blue Dahlia

Good morning friends.  I'm here this morning to share with you a card I made using the Dazzling Dahlia flower from Heartfelt Creations and Art Foam Paper.  The foam paper makes such soft and lovely flowers and it is so easy to work with!

Products Used:

Floral Butterfly Paper Collection, HCDP1-2127

Large Floral Butterfly Cling Stamp Set, HCPC-3951
Large Floral Butterfly Die, HCD2-7352
Regal Lattice Gateway Die, HCD2-7339
Dazzling Dahlia Cling Stamp Set, HCPC-3928
Dazzling Dahlia Die, HCD1-7323
Dahlia and Leaves Cling Stamp Set, HCPC-3929
Dahlia and Leaves Die, HCD1-7324
Art Foam Paper-10 Pack, HCFS1-465
Stack and Store Daubers-Pack of 30, HCDA2-450
Hydra Sponges, RLHS100
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Rajni Chawla's Frosting Powder, PGM15016
Ranger Archival Ink Pad - Pink Peony, RACP649
Ranger Archival Ink Pad - Sky Blue, RACP656
Ranger Archival Ink Pad - Fern Green, RACP962

Ranger Archival Ink Pad - Leaf Green, RACP436
Memento Dye Ink Pad - Danube Blue, TSMP600

Other Products: Die Cut Machine, Hot Glue Gun, Heat Gun, White Enbossing Powder, Seam Binding, Stormy Sky Distress Ink, Scor-Tape, ColorBox Frost White Ink

Instructions: My finished card size is 5 1/2 x 7 1/2”. To make card base, use a sheet of 8 1/2 x 11” cardstock and cut at 5 1/2". Score one piece at 1" and fold. Add glue to this scored flap and glue the other piece of cardstock to it. Now cut off the 1" off overhang so that both pieces are the same. Cover the card base with a piece of the paper. I used sheet 9B for this.

Using white cardstock cut out the Regal Lattice Gateway Die and glue it to the card front and set aside while you work on the other elements of the card.

Stamp the flower petals onto Art Foam Paper using Sky blue and stamp the leaves using Fern Green ink. Set aside and allow to dry. It takes quite a while, so be patient. I actually let mine dry overnight. Using coordinating dies cut out the flower and the leaves. Using the Stack and Store Daubers add pink peony ink to the petals and then edge the petals with more Sky Blue ink. I added Leaf Green to the leaves and then edged them with more Fern Green. Using the heat bun and a pick to hold the petals, warm the petals until they begin to curl. I used a sponge and dries clear adhesive to add the Frosting Powder to the leaves and flower petals. Form the flower using hot glue and then adhere to card front with the hot glue as well.

Stamp the little butterflies with white ink and emboss with white embossing powder. Color using Pink Peony and Danube Blue inks. Glue them across the top of the card. They are so delicate, and I just love them fluttering there!

Now cut a piece of white seam binding and color using Stormy Sky Distress ink. Scrunch and allow to dry. Tie a bow and adhere to the card front. I used Scor-Tape and Dries Clear Adhesive to adhere the bow.

If you would like more inspiration just head over to the Heartfelt Creations blog and see what the other designers have created.