Inspiration Wednesday with Heartfelt Creations....

Good morning friends.  I'm here this morning to share another card with you using the Floral Butterfly Collection.  I've always been a huge fan of butterflies and Heartfelt  Creations  has given us so many to use in this collection!

Products Used:
Floral Butterfly Paper Collection, HCDP1-2127
Large Floral Butterfly Cling Stamp Set, HCPC-3951
Large Floral Butterfly Die, HCD2-7352
Floral Butterfly Accents Cling Stamp Set, HCPC-3952
Floral Butterfly Accents Die, HCD1-7353
Small Floral Butterfly Cling Stamp Set, HCPC-3953
Small Floral Butterfly Die, HCD1-7354
Regal Lattice Gateway Die, HCD2-7339
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Rajni Chawla's Crystal Clear, PGM15015
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436

Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Garden Patina, RACP992
Ranger Archival Ink Pad - Deep Purple, RACP430

Instructions: My card size is 3 3/4" x 8 1/2". Make card base and cut a piece of purple cardstock to cover and then add a piece of the Floral Butterfly Paper collection for the next layer. I chose sheet 11B because I love the beautiful plaid!

Die cut the center of the Regal Lattice Gateway Die and glue down toward the top of the card. Cut a piece of Vellum to fit the bottom and stamp the sentiment using black ink. Glue this down using Dries Clear Adhesive and when it dries it will not show through the vellum. Tie a bow using the thread and glue to the corner of the vellum piece.

Stamp the Floral Butterfly Accents flowers using Rich Cocoa ink and color using various colors of ink and the Stack and Store Daubers. Cut out with the coordinating dies and glue to the lattice piece. I stamped the butterflies two ways. Onto white cardstock and then I stamped on vellum using the Frost White ink and embossed with white embossing powder. Color the butterflies stamped onto white cardstock and using their coordinating dies cut out and lay aside. The butterflies embossed onto vellum are cut out and then colored on the front so they will have a bolder look. I used several butterflies on the front of this card as I'm just in love with them.

The last thing I did was to dab dots of Dries Clear Adhesive and sprinkle with glitter. Now everything just sparkles!

Inspiration Wednesday with Heartfelt Creations....

Good morning friends.  I'm here this morning to share another Heartfelt Creations card using the Floral Butterfly Collection.  I hope you enjoy this one because I really enjoyed making it! 

 

Products Used:
Floral Butterfly Paper Collection, HCDP1-2127
Floral Butterfly Accents Cling Stamp Set, HCPC-3952
Floral Butterfly Accents Die, HCD1-7353
Small Floral Butterfly Cling Stamp Set, HCPC-3953
Small Floral Butterfly Die, HCD1-7354
Large Floral Butterfly Cling Stamp Set, HCPC-3951
Large Floral Butterfly Die, HCD2-7352
Large Garden Zinnia Cling Stamp Set, HCPC-3923
Large Garden Zinnia Die, HCD1-7314
Large 3D Zinnia Shaping Mold, HCFB1-491
Fancy Special Day Cling Stamp Set, HCPC-3935
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Stairway Gardens Die, HCD1-7281
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Ribbit Prills, ANC825
Rajni Chawla's Crystal Clear, PGM15015
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Tiger Lily, RACP670
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Garden Patina, RACP992
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Majestic Violet, RACP494

Other Products: White Cardstock, Die Cut Machine, White Embossing Powder, ColorBox Frost White Ink Pad

Instructions: My finished card size is 6" x 6". Make card base using the Flower Shaping Paper and cover with a piece of the paper collection. I chose Page 3B which is a soft purple. Using white cardstock, die cut the stairway die and glue down onto the card front. I chose a colorful piece of the paper collection from page 2A and cut out a square for the center of the stairway die cut.

Stamp the purple flowers from the Floral Butterfly Accents Cling Stamp set with Rich Cocoa ink and color using Majestic Violet and Deep Purple inks. Color the leaves with Leaf Green. Stamp the yellow zinnia flowers with Buttercup ink and color using same. The leafy accents were stamped with Fern Green and then colored with Leaf Green ink. Cut everything out using coordinating dies and set aside. I used the flower shaping tools to shape the petals and glued two of the yellow petals together. Add prills to the centers and when dry add glitter. Dot glue here and there over the purple flowers and the leaves and add glitter there as well.

Stamp all the butterflies with Frost White ink on vellum and emboss using white embossing powder. Cut out using coordinating dies. I colored using various inks on the front side of the butterflies. That is just my preference. You can decide for yourself which side you choose to color.

Decide on placement of butterflies and flowers and glue down. The card is ready to go.

Debuting the Floral Butterfly Collection with Heartfelt Creations...

Good morning friends and welcome.  I'm here this morning as we are debuting the brand new Floral Butterfly Collection from Heartfelt Creations.  You are going to love this collection as it is all winged things!

Products Used:
Floral Butterfly Paper Collection, HCDP1-2127
Large Floral Butterfly Cling Stamp Set, HCPC-3951
Large Floral Butterfly Die, HCD2-7352
Floral Butterfly Accents Cling Stamp Set, HCPC-3952
Floral Butterfly Accents Die, HCD1-7353
6" x 6" Interlocking Fold Card - White, HCCB1-483
Rounded Lattice Window Die, HCD1-7274
Rounded Eyelet Window Die, HCD1-7273
Eyelet Circle & Basics Small Die, HCD1-7154
Just For You Sentiments Cling Stamp Set, HCPC-3845
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Color In Watercolor Brush - Fine, 409311
Memento Dye Ink Pad - Rich Cocoa, TSMP800

Memento Dye Ink Pad - Danube Blue, TSMP600
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Sky Blue, RACP656
Ranger Archival Ink Pad - Sunflower, RACP005

Other Products: White Cardstock, Canson Watercolor Paper, Magnets, Die Cut Machine, Metallic Cording, Cornflower Blue Ranger Archival Ink

Instructions: The finished card size is 6" x 6". Working on the four fold-out pieces of the card I cut pieces of 3B of the Floral Butterfly paper Collection and used the dies from the Rounded Lattice Window dies and the Round Eyelet Window dies. Glue down these pieces.

Using the Large Floral Butterfly shadow die, cut a butterfly using a piece of the Flower Shaping Paper. I covered this butterfly front and back using a piece of 8B from the paper collection. Now using watercolor paper, stamp the large butterfly using Cactus Flower ink. I used two zig clean markers and the water brush to color the butterfly (081 Light Violet and 042 Turquoise Green). Be sure and dry the color as you move across the butterfly to help the colors not to run together. When finished and dry, add glitter and allow to dry. Using the vellum, cut out the inside piece of the butterfly and glue to the colored butterfly. This makes the butterfly look like it is fluttering along.

Now open up the card flaps and let’s decorate as well as deciding where you want to put the magnets so the butterfly can hold the card closed. This needs to be done before you finish gluing down the paper pieces of the back of the shadow piece and on the inside of the right side flap. Now cut out pieces of 11B of the paper collection using the die from the Round Lattice Window die. Decide on a card front to go on the inside. It is very easy as the paper all coordinates well; the guess work is taken out for you. I chose a sunny piece and glued it down. Stamp the floral accent pieces onto a piece of the flower shaping paper. Use the Stack and Store Daubers to color in and then cut out with coordinating dies. I also stamped a pretty butterfly and colored it to fit on the right hand side. Stamp the sentiment and using the round dies cut it out and glue to the inside panel. Tie a bow using the metallic cording and adhere to the top of the circle sentiment. Glue down the greenery and flowers and add more glitter to all areas of the part of the card.

The card is finished and all you need to do is fold it together and put into a regular 6 x 6 envelope and it should mail with no problem. It can also go into a clear envelope. I love how this card came out and was so impressed at how easy it came together! Good luck with yours!

Inspiration Wednesday with Heartfelt Creations...

Good morning friends!  I'm here this rainy Wednesday morning to share with you another card I have made using the Sweet Magnolia Collection from Heartfelt Creations.  

Products Used:
Sweet Magnolia Paper Collection, HCDP1-2126
Sweet Magnolia Bouquet Cling Stamp Set, HCPC-3950
Sweet Magnolia Bouquet Die, HCD1-7348
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Heart of Gold Prills, ANC804
Rajni Chawla's Crystal Clear, PGM15015
Memento Dye Ink Pad - Rich Cocoa, TSMP800

Other Products: PrismaColor Pencils (PC930, PC1005, PC908, PC909, #738, 738 1/2) Pink Blending Stump, Odorless Mineral Spirits, White and Black Cardstock, Seam Binding, Burgundy Ink, Dimensional Tape, Die Cut Machine

Instructions: My finished card size is 4 3/4" x 6". Make card base and cover with a piece of the 11B Sheet from the Sweet Magnolia paper collection. Cut a piece of black cardstock 5 1/8 x 3 7/8 and then cut a piece of white cardstock 1/8" smaller and glue the white onto the black. This gives just a tiny bit of the black showing and it really brings out the image.

Stamp the Sweet Magnolia Bouquet image with Rich Cocoa ink and color with colored pencils. Add the prills and then add glitter and allow to dry. Color the seam binding with ink, scrunch and allow to dry. Tie a bow and adhere to the base of the colored image. Using Dimensional Tape, adhere to the card front.